Editing Measurements/Diagnosis - EDAN iSe Series User Manual

iSE Series Electrocardiograph User Manual
2
○
1 Averages thumbnail
The averaged complexes of standard leads and ALL are displayed. Slide the thumbnail to
switch from one lead to another. Tap on one lead to display its magnified averages in
○
2 Magnified averages
There are six measurement lines matching six measurement points. They are P1 (onset
of P wave), P2 (offset of P wave), Q (onset of QRS complex), S (offset of QRS complex),
T1 (onset of T wave), and T2 (offset of T wave). Tap and slide a measurement line of an
averaged complex, and the same line of other averages will be automatically moved. To
save measurements after moving these lines, tap Re-diagnose in Averages screen. The
measurements and diagnosis will be automatically updated.
Double-tap this portion, a measurement pane will pop up. Slide the pane lines to get
real-time QRS duration, amplitude, and HR.
○
3 Detailed measurements of one lead.
Slide left to display the measurement results of all leads.

6.3 Editing Measurements/Diagnosis

Editing Measurements
To edit auto measurements, tap on it. The Modify Measurements window opens. Enter
the values, and tap OK to save your modifications. The measurements will be
automatically updated.
The measuring parameters are listed below.
Parameter
HR (bpm)
P (ms)
PR (ms)
Description
Heart Rate
P wave duration
P-R interval
3
- 41 -
Editing ECGs
○
2 .