EDAN iSe Series User Manual page 10

iSE Series Electrocardiograph User Manual
1 Paper tray switch
2 Mains AC power
3
4
USB interface
5
6 Type-C interface
SIM and SD cards
7
two-in-one slot
Figure 4 Back
2
1
Name
Pull down the switch to open the paper tray. To close
the tray, close the door directly.
NOTE:
This is only applicable to electrocardiographs with
thermal printer.
Connects the system to an AC power supply via
power cable.
LAN port Connect to a LAN cable.
Connect to your keyboard, mouse, U disk, USB
printer, and code scanner.
NOTE: Only FAT32 format is supported by the USB
storage devices.
Used only by the manufacturer. NOT for recharging.
Insert SIM card and SD card for data transmission
and storage.
7
3 4 5 6
- 4 -
Description
Introduction