EDAN iSe Series User Manual page 58

iSE Series Electrocardiograph User Manual
External storage
is forbidden
Report Format
Recording
Sequence
Recording
Device
Speed
AGC
Storage Location
Gain Setting
Report Print
Channel
VCG Calculation If selected, you can get a printout of VCG calculation report in
In DICOM (Encapsulated PDF) files and DICOM (ECG Waveform)
files, the value of QTc is always calculated by the Bazzet formula.
Choose from: On, Off.
Choose from:
Pediatric mode: 3x3, 6+3, 9x1
12-lead: 3x4+1R, 6x2+1R, 12x1.
15-lead: 3x5+1R, 6+9, 15x1
18-lead: 6x3+1R, 18x1
NOTE:
In the case of external printer, only the default report formats are
available.
Choose from: Sequential, Simultaneous.
"Simultaneous" prints ECG data that was captured simultaneously
for all lead groups. "Sequential" prints ECG data that was captured
at sequential intervals for each lead group in turn.
Choose from: Thermal printer, WIFI printer, USB printer.
If a thermal printer is not configured, you can connect an external
printer. For more about the external printer, see Chapter 7
an ECG Report
.
Choose from: 1.25 mm/s, 5 mm/s, 6.25 mm/s, 10 mm/s, 12.5
mm/s, 25 mm/s, and 50 mm/s.
If selected, the gain will be automatically adjusted. The default
setting is Off.
Choose from: Local memory, External SD card.
Choose from: 1.25 mm/mV, 2.5 mm/mV, 5 mm/mV, 10 mm/mV,
20 mm/mV, 10/5 mm/mV.
Define the channels to be printed in the ECG report.
The options are varied depending on the lead mode.
12-lead: 3 Channels, 6 Channels, 12 Channels, and Customize.
15-lead: 3 Channels, 6 Channels, 15 Channels, and Customize.
16-lead: 3 Channels, 6 Channels, 16 Channels, and Customize.
9-lead: 3 Channels, 6 Channels, 9 Channels, and Customize.
18-lead: 3 Channels, 6 Channels, 18 Channels, and Customize.
When you select "Customize", you can select the leads for 3 or 6
channels.
- 50 -
System Setting
Printing