EDAN iSe Series User Manual page 16

iSE Series Electrocardiograph User Manual
Auto
Figure 10 ECG file tab
Start or stop ECG recording.
NOTE: iSE can record up to 1,800-second ECGs.
Re-acquire ECGs.
Recording mode, including Auto and Manual. Tap on it to toggle
between the two modes.
In the Auto mode, the system will acquire ECGs at the set time and
then print a report. If the user stop recording before the time, the
system will print the last 10s of ECG.
In the Manual mode, the system will not stop recording or printing
ECGs until you tap the stop button.
This icon provides the following setting options: gain, filter, speed,
and lead mode. Tap the icon again to hide these options.
Gain.
Options are: 1.25 mm/mV, 2.5 mm/mV, 5 mm/mV, 10 mm/mV, and 20
mm/mV. The default gain is 10mm/mV.
Filter. Options are: 25 Hz, 35 Hz, 45 Hz, 75 Hz, 100 Hz, 150 Hz, 270
Hz, 300 Hz, and 350 Hz. The default filter is 100Hz.
Speed. Options are: 5 mm/s, 12.5 mm/s, 25 mm/s, and 50 mm/s. The
default speed is 25mm/s.
Lead mode.
• If DE12 is used, options are: pediatric mode, 12 lead (Standard or
Cabrera). The default setting is 12 lead (Standard).
• If DE18 is used, options are: pediatric mode, 12 lead (Standard or
Cabrera), 15 lead, 16 lead, and 18 lead. The default setting is 18
lead.
Record rhythm ECGs. To toggle between single-lead and three-lead
rhythm strips, swipe the screen left or right.
Return to the previous menu.
- 10 -
Introduction