Battery Care Warnings - EDAN iSe Series User Manual

Electrocardiograph
Hide thumbs Also See for iSe Series:
Table of Contents

Advertisement

iSE Series Electrocardiograph User Manual
suggested to build a VLAN, assign the LAN ports where the approved switch
port and electrocardiograph are into the same VLAN, and isolate it from other
VLANs.
9. When the electrocardiograph is returned for maintenance, disposed of, or
removed from the medical institution for other reasons, it is necessary to
ensure that all patient data are removed from the electrocardiograph.
10.Please protect the privacy of the information and data displayed on the screen,
and those information and the data stored in the electrocardiograph.
11.Users should make a backup of data on a periodic basis.
12.Disable unnecessary services from the operating system and reduce
vulnerabilities.
13. It is recommended that you disable the Administrator and Guest accounts.
14.Destroy the sensitive information in the idle or scrapped device.
15.Sharing patient data or data storage folders on the network is not supported by
the iSE system and may cause irreversible data lost or corruption.
16. For proper running, the iSE system has access to user's NFC, Bluetooth, WIFI,
system setup, storage, location, and system time setup without prior
permission.
17. Do not install in iSE the other APPs or software that are not configured by the
manufacturer.
18. The operating system of iSE can only be upgraded by the manufacturer or its
authorized personnel. If the user reinstall iSE with other operating system not
authorized by EDAN, the resulting security risks and losses shall be borne by
the user. Possible security risks are user information stolen, sending SMS
automatically, locating your location.

1.2.3 Battery Care Warnings

1. Improper operation may cause the internal battery to be hot, ignited or
exploded, and it may lead to the decrease of the battery capacity. It is necessary
to read the user manual carefully and pay more attention to warning messages.
2. Batteries of the same model and specification as manufacture configuration
should be used.
3. DANGER OF EXPLOSION -- Do not reverse the anode and the cathode when
WARNING
- 21 -
Introduction

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents