EDAN iSe Series User Manual page 83

iSE Series Electrocardiograph User Manual
The iSE is intended for use in the electromagnetic environment specified below. The
customer or the user of the iSE should assure that it is used in such an environment.
Immunity test
Electrostatic
discharge (ESD)
IEC/EN
61000-4-2
Electrical fast
transient/burst
IEC/EN
61000-4-4
Surge
IEC/EN
61000-4-5
Power frequency
(50 Hz / 60 Hz)
magnetic field
IEC/EN
61000-4-8
IEC/EN 60601
test level
8 kV contact
15 kV air
2 kV for power
supply lines
1 kV line to line
2 kV line to ground
30 A/m
Compliance
level
8 kV contact
15 kV air
2 kV for power
supply lines
1 kV line to line
2 kV line
ground
30 A/m
EMC Information
Electromagnetic
environment
guidance
Floors should be wood,
concrete or ceramic tile.
If floor are covered with
synthetic material, the
relative humidity should
be at least 30%.
Mains power
should be that of a
typical commercial
hospital environment.
Mains power
should be that of a
to
typical commercial
hospital environment.
Power frequency
magnetic fields should
be at
characteristic of a typical
location in a
commercial or hospital
environment.
-
quality
or
quality
or
levels
typical