Step 3: Remove Battery Unit - GRASS VALLEY ATP-2000 User Manual

Fig. E-3: Rear Cover Removed
Now proceed to

Step 3: Remove Battery Unit

1 Locate the battery unit in the unit. It is a blue casing with a pair of wires (twisted black/
red) going to it from a white, 2-pin header-style connector.
Fig. E-4: Battery Unit Location
2 Disconnect the black/red twisted wires from the 2-pin header connector, noting the
orientation of the wires to the connector for reassembly.
Battery unit, blue casing
Step 3: Remove Battery Unit.
Wire
Battery unit, blue casing
White 2-pin header-style connector
ATP-2000
User Guide
65