GRASS VALLEY ATP-2000 User Manual page 45

ATP-2000 Control Screen (Web Page)
ATP-2000 Control Screen (Web Page)
Table 4-1: ATP-2000 Web Page Settings
Item
Network Settings:
IP Switch Method
IP Address
Subnet Mask
Default Gateway
Apply
Server Settings:
GVOP Domain
GV Server IP
Panel Id
Panel Name
Location
Notes
Apply
Panel Manager:
Panel Brightness
Software Version
ReBoot Panel
Reset Panel
24
Description
Select IP address allocation method:
• DHCP - Use DHCP on the network (default).
• Static - Use a static IP address.
Displays the allocated IP address.
Enter an IP address if 'static' method selected.
Displays the allocated sub-net mask.
Enter a sub-net mask if 'static' method selected.
Displays the allocated default gateway IP Address.
Enter an IP address if 'static' method selected.
Click to apply any Network Settings changes.
Displays the GV Orbit Protocol Domain number assigned to
the ATP-2000 panel. This is automatically discovered and
assigned to the panel.
The Domain number can be entered here if required.
Default domain is100.
Enter the IP Address of the GV Orbit server in the GV Orbit
system.
Displays the Panel ID (RollCall address) of the panel in the GV
Orbit system.
Enter the unique Panel ID here as part of the set up of a panel.
(See Getting Started, on page 13.)
Enter a human-readable name to identify the panel by.
Enter a note about the location of the panel device. This is
information for system users.
Enter any notes about the panel device. This is information for
system users.
Click to apply any Network Settings changes.
Slider control. Adjust the brightness of the panel device's front
panel user display.
Displays the software version running on the panel.
Click to reboot the panel. (Click Start button.)
Click to carry out a soft restart of the panel. (This avoids having
to do a physical reset of the panel.)