Further Safety Information - GRASS VALLEY ATP-2000 User Manual

Advanced touch panel
Table of Contents

Advertisement

Further Safety Information

Lithium Batteries
Battery Warning
Your Grass Valley equipment usually comes with at least one button cell (coin cell) battery
located on the main printed circuit board. The batteries are used for settings backup and
should not need to be replaced during the lifetime of the equipment.
Battery Disposal
Before disposing of your Grass Valley equipment, please:
1 Ensure the AC adapter / power cord is unplugged from the power supply.
2 Remove the battery as described in Appendix E,
3 Dispose of the battery and equipment according to your local environmental laws and
guidelines.
WARNINGS
• Be careful not to short-circuit the battery by adhering to the
appropriate safe handling practices.
• Do not dispose of a battery into fire or a hot oven, or mechanically
crush it, or cut it, because this can result in an explosion.
• Do not dispose of batteries in a fire as they may explode.
• Batteries may explode if damaged or overheated.
• Do not dismantle, open or shred batteries.
• Do not leave a battery in an extremely high temperature
surrounding environment that can result in an explosion or the
leakage of flammable liquid or gas.
• Do not subject a battery to extremely low air pressure because this
may result in an explosion or the leakage of flammable liquid or gas.
• In the event of a battery leak, do not allow battery liquid to come in
contact with skin or eyes.
• Seek medical help immediately in case of ingestion, inhalation, skin
or eye contact, or suspected exposure to contents of an opened
battery.
Battery
Replacement, on page 61.
ATP-2000
User Guide
xiv

Advertisement

Table of Contents
loading

Table of Contents