Step 3: Panel Manager Settings; Connect To Network - GRASS VALLEY ATP-2000 User Manual

Step 3: Panel Manager Settings

1 Adjust the unit's display 'Panel Brightness' with the slider bar.
Finally:
2 At ReBoot Panel, click the Start button to restart (reboot) the panel.
The panel restarts.

Connect to Network

When the panel has restarted:
1 Connect the panel to the GV Orbit system 'control/management' network, if not
already connected.
The GV Orbit system will discover it.
This has now set up the minimum settings to get started with the panel. For details about
the unit's web page and other settings, see
page 21.
Note: For full functionality, the following must have network connectivity
with multi-cast data enabled on the network:
• ATP-2000 panel;
• GV Orbit Client computer; and
• GV Orbit server(s).
ATP-2000 Control Screen (Web
ATP-2000
User Guide
Page), on
19