Card Screens; Accessing A Parameter Control Screen - GRASS VALLEY ATP-2000 User Manual

Advanced touch panel

Table of Contents

Operation

Card Screens

At the ATP-2000 Home screen:

1 On the LHS, select the function to control. (For example, select 'Cards' .)

2 On the RHS, select the card type to control. (For example, select 'XIP' .)

3 On the LHS, select the particular card to control. (For example, select XIP 'Card 6' .)

The selected card is named on the right-hand side. Card parameters may now be

changed, see

When a particular card type is selected, the Card Home screen is shown which:

• lists all cards of the selected type that can be parameter-controlled (on left-hand side);

and

• shows the card's adjustable parameters (on right-hand side).

Card List Grid

Fig. 5-4: Generic Card Home Screen

Note: Card Screens:

Parameters for a particular device/module/card type are device-

specific and the corresponding card 'home' screens, and any

subsequent card screens, are also device-specific.

For device-specific information, please see the individual

documentation for each device/card/module type.

Device-specific information is not covered in this document.

Generic Parameter Control

Screen.

Card Parameter Controls, device-specific

Table of Contents

Table of Contents