Re-Boot Panel; Factory Reset; Maintenance - GRASS VALLEY ATP-2000 User Manual

Advanced touch panel

Table of Contents

Re-Boot Panel

To restart/reboot the ATP-2000, on the web page. Under the Panel Manager section of the

web page:

1 At 'Reboot Panel' , click Start. See Figure 6-2.

2 Click OK to any prompts to restart the panel.

The panel restarts.

Fig. 6-1: ReStart/ReBoot from ATP-2000 Web Page

To reset the ATP-2000 back to factory settings, on the web page:

1 Click Factory under the Panel Manager section of the web page. See Figure 6-2.

2 Click OK to any prompts to reset the panel.

The panel returns to its shipped state but with the current software version.

Fig. 6-2: Factory Reset from ATP-2000 Web Page

At 'Reboot Panel' , click Start to restart/reboot ATP-2000 panel.

Click Factory to set ATP-2000 back to factory settings.

Table of Contents

Table of Contents