Micro Sd Card Slots - GRASS VALLEY ATP-2000 User Manual

Micro SD Card Slots

A dual micro SD card slot is located on the top of the unit on one side. Two micro SD cards
are fitted to the unit in the factory and are used by the unit for storage of its operating
system, application and data. These should not be removed.
Fig. C-3: Micro SD Card Slots (Do Not Remove Micro SD Cards)
CAUTION
Do not ordinarily remove either of the two micro SD cards fitted to the unit. 
Do not ordinarily fit any micro SD cards into the unit.
SD
BOOT
Micro SD Card 'double-slot' , for two micro SD cards.
Note: Micro SD cards should not normally be removed
ATP-2000
User Guide
57