15 WHEELS, TIRES
15.3
74
H01198-10
M01698-11
M01697-10
Removing the rear wheel
F02209-10
–
Check the wheel bearing for damage and wear.
»
If the wheel bearing is damaged or worn:
–
Change front wheel bearing.
–
Clean and grease the contact surfaces
Long-life grease (
p. 94)
–
Insert the spacers.
–
Clean and grease the wheel spindle.
Long-life grease (
p. 94)
–
Position the front wheel.
The brake linings are correctly positioned.
–
Insert the wheel spindle.
–
1
Mount and tighten screw
Guideline
Screw, front
M10
wheel spindle
–
Operate the hand brake lever several times until the brake linings
are seated correctly against the brake disc.
–
Remove the motorcycle from the lift stand. (
–
Operate the front brake and compress the fork a few times firmly.
The fork legs straighten.
–
2
Tighten screws
.
Guideline
Screw, fork stub
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
1
Remove nut
.
–
2
Take off chain adjuster
.
A
of the spacers.
.
40 Nm (29.5 lbf ft)
Loctite
p. 42)
M6
10 Nm (7.4 lbf ft)
p. 42)
®
243™