GAS GAS MC-E 5 Owner's Manual page 49

Condition
Individual installation position
–
Position the fork legs.
Guideline
Observe the position determined during removal.
Bleeder screws
Condition
Standard installation position
F02179-11 –
Position the fork legs.
Bleeder screws
The second milled groove (from the top) is flush with the
upper edge of the upper triple clamp.
–
Tighten screws
Guideline
Screw, bottom triple
clamp
M01862-10
–
4
Tighten nut
Guideline
Nut, steering head
–
7
Tighten screw
Guideline
Screw, top triple clamp
–
Using a plastic hammer, tap lightly on the upper triple clamp to
avoid stresses.
M01845-10
–
Tighten screws
Guideline
Screw, top triple clamp
–
Fix the magnetic switch cable to the handlebar with a new cable tie.
–
Position the brake caliper, mount screw
Guideline
Screw, front
brake caliper
–
Mount and tighten screw
Guideline
Screw, front
brake caliper
M01843-11
–
Position the brake line and the clamp. Mount and tighten
bl
screws .
SERVICE WORK ON THE CHASSIS 13
5
are positioned toward the rear.
5
are positioned toward the rear.
6
.
M8 15 Nm (11.1 lbf ft)
.
M20x1.5 10 Nm (7.4 lbf ft)
.
M8 20 Nm (14.8 lbf ft)
8
.
M8 20 Nm (14.8 lbf ft)
9
, and tighten.
M8x60 20 Nm (14.8 lbf ft)
bk
.
M8x40 20 Nm (14.8 lbf ft)
®
Loctite 243™
Loctite ® 243™
47