–
Remove lock ring
–
Remove screw
–
Remove the brake linings.
–
Clean the brake caliper and the brake caliper bracket.
–
Position the new brake linings.
Info
Always change the brake linings in pairs.
Ensure that the brake linings are correctly positioned in the
holding spring.
–
Mount and tighten screw
Guideline
Screw, brake linings
–
Mount lock ring
Warning
Danger of accidents Oil or grease on the brake discs
M01858-10
reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when neces-
sary.
–
Check the brake discs. (
–
Position the brake caliper, mount screw
Guideline
Screw, front
brake caliper
–
Mount and tighten screw
Guideline
Screw, front
brake caliper
M01857-10
–
Check the brake fluid level and correct if necessary.
Guideline
Brake fluid level below reser-
voir rim
Brake fluid DOT 4 / DOT 5.1 (
–
2
Position cover
–
Mount and tighten screws
Q00414-10
Info
Use water to immediately clean up any brake fluid that has
overflowed or spilled.
Finishing work
–
Remove the motorcycle from the lift stand. (
6
.
7
.
7
.
M5
8 Nm (5.9 lbf ft)
6
.
p. 60)
4
, and tighten.
M8x60
20 Nm (14.8 lbf ft)
5
.
M8x40
20 Nm (14.8 lbf ft)
5 mm (0.2 in)
p. 93)
3
with membrane
.
1
.
BRAKE SYSTEM 14
Loctite
®
243™
Loctite
®
243™
p. 42)
65