Main work
–
Remove lock ring
–
Remove screw
–
Remove screw
F02205-10
–
Take off the brake caliper.
Info
Do not kink or damage the brake line.
–
Remove the brake linings.
–
Clean the brake caliper and the brake caliper bracket.
–
Allow the brake caliper and the brake line to hang loosely to the
side.
F02207-10
–
Check the brake discs. (
–
Remove screws
–
6
Take off cover
–
Press the brake piston back into the basic position and ensure that
brake fluid does not flow out of the brake fluid reservoir, extracting
some if necessary.
M01696-11
–
Position the new brake linings.
Info
Always change the brake linings in pairs.
Ensure that the brake linings are correctly positioned in the
holding spring.
–
Position the brake caliper on the brake disc.
The brake linings are correctly positioned.
F02207-11
–
Mount and tighten screw
Guideline
Screw, rear brake
caliper
–
Mount and tighten screw
Guideline
Screw, rear brake
caliper
F02206-10
–
Mount and tighten screw
Guideline
Screw, brake linings
–
Mount lock ring
1
.
2
.
3
4
and screw
.
p. 60)
5
.
7
with washer
and membrane
3
.
M6x16
10 Nm (7.4 lbf ft)
4
.
M6x40
10 Nm (7.4 lbf ft)
2
.
M5
8 Nm (5.9 lbf ft)
1
.
BRAKE SYSTEM 14
8
.
Loctite
®
243™
Loctite
®
243™
71