11 SUSPENSION SETTING
11.14
36
Adjusting the rebound damping of the fork
Info
The hydraulic rebound damping determines the fork suspension behavior.
M01834-10
Guideline
Air pressure
Gradual changing of the air
pressure in steps of
Minimum air pressure
Maximum air pressure
Info
Never adjust the air pressure to a value outside the stated
range.
–
Disconnect the fork airpump from the left fork leg.
When disconnecting, excess pressure will escape from the hose
– the fork leg itself does not lose any air.
The fork airpump indicator switches off automatically after
80 seconds.
–
Mount the protection cap.
Info
Only mount the protection cap by hand.
Finishing work
–
Remove the motorcycle from the lift stand. (
–
1
Turn adjuster
clockwise all the way.
Info
1
Adjuster
is located at the upper end of the right fork leg.
–
Turn counterclockwise by the number of clicks corresponding to the
fork type.
Guideline
Rebound damping
Comfort
Standard
Sport
Info
Turn clockwise to increase the damping; turn counterclock-
wise to reduce damping when the shock absorber rebounds.
2 bar (29 psi)
0.2 bar (3 psi)
1.4 bar (20 psi)
4 bar (58 psi)
p. 42)
15 clicks
12 clicks
10 clicks