Lenovo ThinkSystem SR850 V2 Service Manual page 33

Alert Category: Critical - Temperature
SNMP Trap ID: 0
CIM Prefix: PLAT CIM ID: 0498
User Action:
Complete the following steps:
1. Ensure the room temporature is within server environmental specification to adjust the temporature.
2. If the problem issue still exist, check XCC Web GUI to check the temporature value is still higher than
system spec.
3. Please contact Lenovo support.
Service Action:
Follow the action plan associated with the Primary Event < FQXSPCA0011N> which triggered this Error.
1. Review PD Steps.
2. Check Lenovo Support for known service bulletins and Tech tips.
3. Inspect CPU heatsinks to ensure they are properly secured to the system board and are of correct Type based
on CPU TDP.
4. If problem persists, escalate to next level of support.
• FQXSPCA0015J: Sensor [SensorElementName] has transitioned from normal to non-critical state.
This message is for the use case when an implementation has detected a Sensor transitioned to non-
critical from normal.
Severity: Warning
Serviceable: Yes
Automatically notify Support: No
Alert Category: Warning - Temperature
SNMP Trap ID: 12
CIM Prefix: PLAT CIM ID: 0520
User Action:
Complete the following steps:
1. Check the event log of xClarity Controller for any fan or cooling-related issues or power-related
issues.
2. Make sure that the airflow is not obstructed and that fillers are in place and correctly installed.
3. Make sure that the room temperature is within operating specifications.
Service Action:
1. Review PD Steps.
1. 2. Check Lenovo Support for known service bulletins and Tech tips.
2. 3. If problem persists, escalate to next level of support.
• FQXSPCA0017M: Sensor [SensorElementName] has transitioned to critical from a less severe
state.
This message is for the use case when an implementation has detected a Sensor transitioned to critical
from less severe.
Severity: Error
.
Chapter 2 XClarity Controller events
29