Lenovo ThinkSystem SR850 V2 Service Manual page 127

Serviceable: Yes
Automatically notify Support: No
Alert Category: Critical - Power
SNMP Trap ID: 4
CIM Prefix: PLAT CIM ID: 0104
User Action:
Please check the consistency of PSU models on xClarity Controller (XCC) Web GUI.
Service Action:
Complete the following steps until the problem is solved:
1. Review PD Steps.
2. Check Lenovo Support for known service bulletins and Tech tips.
3. If problem persists, escalate to next level of support.
• FQXSPPW0008I: [SensorElementName] has been turned off.
This message is for the use case when an implementation has detected a Power Unit that has been
Disabled.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Power Off
SNMP Trap ID: 23
CIM Prefix: PLAT CIM ID: 0106
User Action:
Information only; no action is required
Service Action:
Information only; no action is required.
• FQXSPPW0009I: [PowerSupplyElementName] has been Power Cycled.
This message is for the use case when an implementation has detected a Power Unit that has been power
cycled.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0108
User Action:
Information only; no action is required
Service Action:
Information only; no action is required.
.
Chapter 2 XClarity Controller events
123