Lenovo ThinkSystem SR850 V2 Service Manual page 210

Service Action:
Complete the following steps:
1. Verify PD steps.
2. If there are failing DIMMs then follow the debug path to address the DIMM issue.
3. If problem persists, escalate to next level support.
• FQXSFMA0010I: Invalid memory configuration for Sparing Mode has been recovered. [arg1]
Severity: Info
User Action:
Information only; no action is required.
Service Action:
Information only; no action is required.
• FQXSFMA0010K: Invalid memory configuration for Sparing Mode. Please correct memory
configuration. [arg1]
Severity: Error
User Action:
Complete the following steps:
1. Ensure that all the DIMMs are enabled and functional by booting to F1 Setup or in XCC web .If any
DIMMs are non-functional adddress that first.
2. Make sure that the DIMM connectors are correctly populated for sparing mode, according to the
service information for this product.
3. If the problem persists, collect Service Data logs.
4. Contact Lenovo Support.
Service Action:
Complete the following steps:
1. Verify PD steps.
2. If there are failing DIMMs then follow the debug path to address the DIMM issue.
3. If problem persists, escalate to next level support.
• FQXSFMA0011I: Memory population change detected. [arg1]
Severity: Info
User Action:
Complete the following steps:
1. If you have added or removed DIMMs to the system, and no additional errors were detected, then
please ignore this message.
2. Check system event log for uncorrected DIMM failures and replace those DIMMs.
Service Action:
Information only; no action is required.
206
ThinkSystem SR850 V2 System Events Service Guide