Maximal Series Overview; Maximal Series Configuration Chart; Maximal Series Features - Altronix Maximal Series Installation Manual

Access power controllers

Hide thumbs Also See for Maximal Series:

Installation manual (20 pages)

Installation manual (16 pages)

Installation manual (12 pages)

Table Of Contents

Table of Contents

Maximal Access Power/Controllers distribute and switch power to access control systems and accessories. They convert a

115VAC 60Hz input into sixteen (16) independently controlled 12VDC or 24VDC fuse protected outputs. These Fail-Safe/

Fail-Secure power outputs may be converted to dry form "C" contacts. The outputs are activated by an open collector sink

or normally open (NO) dry trigger input from an Access Control System, Keypad, Push Button, REX PIR, etc. Units will

route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders,

etc. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices.

The fire alarm disconnect feature is individually selectable for any or all of the sixteen (16) outputs. All interconnecting

equipment must be UL Listed.

Altronix

Output Voltage Options

Model

Number

Power Supply 1 Power Supply 2

AL400ULXB2

12VDC @ 3.5A 12VDC @ 3.5A

Maximal11

12VDC @ 2.7A 24VDC @ 2.7A

24VDC @ 3.5A 24VDC @ 2.7A

AL600ULXB

12VDC @ 5.5A 12VDC @ 5.5A

Maximal33

12VDC @ 5.7A 24VDC @ 5.7A

24VDC @ 5.5A 24VDC @ 5.7A

AL1012ULXB

Maximal55

12VDC @ 9.5A 12VDC @ 9.5A

AL1012ULXB AL1024ULXB2

Maximal75

12VDC @ 9.5A 24VDC @ 9.5A

AL1024ULXB2 AL1024ULXB2

Maximal77

24VDC @ 9.7A 24VDC @ 9.7A

*Maximal11 outputs are power-limited.

• Sixteen (16) independently trigger controlled outputs.

Output options:

a) Sixteen (16) Fail-Safe filtered and electronically regulated power outputs.

b) Sixteen (16) Fail-Secure filtered and electronically regulated power outputs.

c) Sixteen (16) form "C" relay outputs (rated @ 5A/28VDC or VAC).

d) Any combination of the above.

• Sixteen (16) Access Control System trigger inputs.

Input trigger options:

a) Sixteen (16) normally open (NO) dry trigger inputs.

b) Sixteen (16) open collector inputs.

c) Any combination of the above.

• Sixteen (16) unswitched filtered and electronically regulated aux. power outputs (outputs are rated @ 2.5A).

• ACM8 maximum current is 2.5A per output.

• Red LEDs on ACM8 board indicate individual outputs are triggered (relays energized).

Maximal11/Maximal33/Maximal55/Maximal77/Maximal75 Access Power Controllers (Fused)