Altronix Maximal1RHD Installation Manual
  1. Manuals
  2. Brands
  3. Altronix Manuals
  4. Controller
  5. Maximal1RHD
  6. Installation manual

Altronix Maximal1RHD Installation Manual

Maximal rack mount series access power controller
Hide thumbs Also See for Maximal1RHD:
Table of Contents

Advertisement

Quick Links

Download this manual
Rack Mount Series
Installation Guide
Models include:
Maximal1RHD
- 12VDC @ 4A or 24VDC @ 3A.
- Eight (8) PTC Protected Outputs.
Maximal3RHD
- 12VDC or 24VDC @ 6A.
- Eight (8) PTC Protected Outputs.
Maximal33RD
- 12VDC and/or 24VDC @ 12A.
- Sixteen (16) PTC Protected Outputs.
Rev. 010708
Maximal1RD
- 12VDC @ 4A or 24VDC @ 3A.
- Sixteen (16) PTC Protected Outputs.
Maximal3RD
- 12VDC or 24VDC @ 6A.
- Sixteen (16) PTC Protected Outputs.
More than just power.
TM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Maximal1RHD and is the answer not in the manual?

Questions and answers

Related Manuals for Altronix Maximal1RHD

Summary of Contents for Altronix Maximal1RHD

  • Page 1 Rack Mount Series Installation Guide Models include: Maximal1RHD Maximal1RD - 12VDC @ 4A or 24VDC @ 3A. - 12VDC @ 4A or 24VDC @ 3A. - Eight (8) PTC Protected Outputs. - Sixteen (16) PTC Protected Outputs. Maximal3RHD Maximal3RD - 12VDC or 24VDC @ 6A.

  • Page 2: Table Of Contents

    Table of Contents: Overview pg. 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Maximal Rack Mount Series Configuration Chart .

  • Page 3: Overview

    Overview: Altronix Maximal Rack Mount Series units distribute and switch power to access control systems and acces- sories . They convert a 115VAC, 50/60Hz input into eight (8) or sixteen (16) independently controlled 12VDC and/or 24VDC PTC protected outputs . Outputs are activated by an normally open (NO) or normally closed (NC) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc .

  • Page 4: Installation Instructions

    Connect the Normally Open or Normally Closed input triggers from the access control devices to the removable terminals marked [IN1 and GND] through [IN8 and GND] for Maximal1RHD and Maximal3RHD . For Maximal1RD, Maximal3RD and Maximal33RD connect devices to the second set of terminals marked .

  • Page 5: Maintenance

    FACP Input FACP Signal Circuit (Polarity Reversal) . Normally Closed [NC] Trigger Input . Normally Open [NO] Trigger Input . Output Voltage and Stand-by Specification Charts: Altronix 20 Min. of 4 Hr. of 24 Hr. of Power Supply Board Battery...

  • Page 6: Power Supply Board Output Voltage Settings

    Power Supply Board Output Voltage Settings: Fig. 1 Fig. 1a OFF - 24V ON - 12V OFF - 24V ON - 12V Maximal1RHD, Maximal1RD Maximal3RHD, Maximal3RD, Maximal33RD Power Supply Board Power Supply Boards - 6 - Maximal Rack Access Power Controllers (PTC)

  • Page 7: Fire Alarm Interface, Output Selection, And Input Type

    Fire Alarm Interface, Output Selection, and Input Type: Fig. 2 Output Trigger LEDs FIRE ALARM INTERFACE OUTPUT SELECT ACM8R-S Fig. 2a Fig. 2b OFF - NC Input ON - NO Input DIP Switches for FACP and Output DIP Switch for Programming NO or NC Input Output Trigger LEDs...

  • Page 8: Power Supply Boards Drawings

    Power Supply Board Maximal1RHD, Maximal1RD Fig. 4 Power Supply Board AC DC 5A 250V C NO NC C – BAT + – DC + --- BAT – BAT + C NO NC C Battery and Built-in Built-in AC Supervision Battery Charging...

  • Page 9: Facp Hook-Up Diagrams

    FACP Hook-Up Diagrams Polarity Reversal Input from FACP Signal Circuit Output (Polarity is referenced in alarm condition) Fig. 7 Fig. 6 5-30VDC 5-30VDC from FACP from FACP FACP FACP Signal Circuit Signal Circuit RESET Factory Installed Normally Open [NO] RESET Jumper Reset Switch Latching...

  • Page 10: Mounting Options

    Mounting Options: Fig. 12 Mounting Hardware (Included): Two (2) mounting brackets . Eight (8) flat head screws for mounting brackets . Eight (8) pan head screws Remove center brace for faceplate . from rack mount chassis before proceeding with installation . Rack Mount Installation 1 .
  • Page 11 Notes: Maximal Rack Access Power Controllers (PTC) - 11 -...

  • Page 12: Rack Mechanical Drawing And Dimensions

    Altronix is not responsible for any typographical errors . 140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056 website: www .altronix .com | e-mail: info@altronix .com | Lifetime Warranty | Made in U .S .A . MEMBER...

This manual is also suitable for:

Maximal33rdMaximal3rhdMaximal1rdMaximal3rd

Table of Contents