Advertisement
Quick Links
Fused Access Power Controller Kits
Models Include:
MaxFit3F8AP
8 Door Kit with Fused Outputs
Fully assembled kit includes:
- One (1) eFlow6NB - Power Supply/Charger
- One (1) ACM8 - Fuse Protected Access Power Controller
- One (1) PD8UL - Fuse Protected Power Distribution Module
- BC750 enclosure
MaxFit3F5AP
8 Door Kit with Fused Outputs
Fully assembled kit includes:
- One (1) eFlow102NB - Power Supply/Charger
- One (1) ACM8 - Fuse Protected Access Power Controller
- One (1) PD8UL - Fuse Protected Power Distribution Module
- BC750 enclosure
Installation Guide
Rev. MF35KF_052720
Installing Company: _________________________ Service Rep. Name: __________________________________________
Address: _________________________________________________________ Phone #: _________________________
More than just power.™
Advertisement
Related Manuals for Altronix MAXIMAL FIT MaxFit3F5AP
Summary of Contents for Altronix MAXIMAL FIT MaxFit3F5AP
- Page 1 Fused Access Power Controller Kits Models Include: MaxFit3F8AP 8 Door Kit with Fused Outputs Fully assembled kit includes: - One (1) eFlow6NB - Power Supply/Charger - One (1) ACM8 - Fuse Protected Access Power Controller - One (1) PD8UL - Fuse Protected Power Distribution Module - BC750 enclosure MaxFit3F5AP 8 Door Kit with Fused Outputs...
-
Page 2: Configuration Chart
Overview: Altronix fused Access Power Controller kits distribute and switch power to access control systems and accessories. They convert a 120VAC 60Hz input into eight (8) independently controlled 12VDC or 24VDC fuse protected outputs. These Fail-Safe/Fail-Secure power outputs may be converted to dry form “C” contacts. Relays are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Keypad, Push Button, REX PIR, etc. - Page 3 MaxFit3F8AP: NEC Power-Limited Wiring Requirements Power-limited and non power-limited circuit wiring must remain separated in the cabinet. All power-limited circuit wiring must remain at least 0.25” away from any non power-limited circuit wiring. Furthermore, all power-limited circuit wiring and non power-limited circuit wiring must enter and exit the cabinet through different conduits.
- Page 4 MaxFit5F8AP: NEC Power-Limited Wiring Requirements Power-limited and non power-limited circuit wiring must remain separated in the cabinet. All power-limited circuit wiring must remain at least 0.25” away from any non power-limited circuit wiring. Furthermore, all power-limited circuit wiring and non power-limited circuit wiring must enter and exit the cabinet through different conduits.
- Page 5 Notes: MaxFit3F8AP, MaxFit5F8AP Installation Guide - 5 -...
- Page 6 Notes: - 6 - MaxFit3F8AP, MaxFit5F8AP Installation Guide...
- Page 7 - UL Listed in the U.S. and Canada. - Local or remote control of up to (2) two Altronix eFlow power output(s) via LAN and/or WAN. - Monitor real time diagnostics: DC output voltage, output current, AC & battery status/service, input trigger state change, output state change and unit temperature.
- Page 8 7.00” (177.8mm) 7.00” (177.8mm) 1.25” (31.8mm) Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice. ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– 140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056 website: www.altronix.com | e-mail: info@altronix.com | Lifetime Warranty...
Need help?
Do you have a question about the MAXIMAL FIT MaxFit3F5AP and is the answer not in the manual?
Questions and answers