Chapter 2 Setting Basic Measurement Conditions; Setting The Wiring System - YOKOGAWA WT5000 User Manual

Chapter 2 Setting Basic Measurement Conditions
2.1

Setting the Wiring System

This section explains operating procedures using the following setup methods.
• Procedure Using the Setup Menu (see chapter 1)
Procedure Using the Setup Menu
1. Tap the Setup icon
2. Tap the Input (Basic) tab. An input settings (basic measurement conditions) overview screen
appears.
Pressing ESC closes the overview screen.
Note
You can also display the input settings (basic measurement conditions) overview screen by moving the
cursor on the Input (Basic) tab using the arrow keys and then pressing SET.
IM WT5000-02EN
, or press MENU under SETUP.
Set the wiring system.
When the input element is 760901 or 760902
► "Wiring System (Wiring)" in the features guide
► "Range Σ link (Range Σ Link)" in the features guide
Input (Basic) tab
When the input element is 760903
2-1