Manual Collimator - Canon OMNERA 400T Operator's Manual

User Interfaces

Manual collimator

3.14 Manual collimator
1. Filter
2. Light field height
3. Measure tape
4. Light on/off
5. Light field width
The collimator has the following functions:
– Turn on/off the light, push the button (4).
– Change the size of the light field, turn the button (2) to adjust the height and the button (5)
to adjust the width.
– Change filter (1), rotate the filter (1) clockwise or counterclockwise.
Four different filters can be chosen:
• 0 mm Al
• 2 mm Al
• 1 mm Al + 0.1 mm Cu
• 1 mm Al + 0.2 mm Cu
– FFD/SID measure tape (2).
– Laser (Option)
For further instructions on handling the collimator, see the Collimator Manual.
OMNERA®
1
2
3
4
Fig. 3-33 Manual collimator
0180-095-418-EN Rev. 6.1
Page 68
5
Operator´s Manual
2020-09-18