4.4.6.2 Exchange Grid
WARNING!
Failure to insert the grid in the correct orientation, with the tube side facing towards
the X-ray source, can result in unsuccessful patient imaging.
Additional corrective patient imaging and additional ionising radiation exposure for
the patient may be needed.
Ensure the grid is inserted in the correct way.
1. Push in and pull out the grid.
1. Exchange the grid.
Insert the grid with the tube side facing upwards, towards the X-ray source. The tube side
of the grid has the specification label and the grid centre line identification.
2. Push in the grid, until it clicks.
Operator´s Manual
2020-09-18
Operating the system
Fig. 4-13
Fig. 4-14
0180-095-418-EN Rev. 6.1
Page 101
Operating the Table
OMNERA®