Synchronization Control/Tracking - Canon OMNERA 400T Operator's Manual

4.6 Synchronization control/tracking

The automatic tracking is activated at the display.
Activation of the synchronization button will drive the OTC to the position for tracking.
The activation will lead to a synchronization and tracking between the tube holder and the
detector.
The synchronization button at the display, also comprises a yellow indication light. This light
indicates if there is an alignment.
• Permanent yellow light — indicates; Alignment.
• Flashing yellow light — indicates; No alignment.
Operator´s Manual
2020-09-18
Fig. 4-27 Synchronization button with indication light — display
0180-095-418-EN Rev. 6.1
Page 117
Operating the system
Synchronization control/tracking
OMNERA®