Qualifications Of Personnel; Operating Personnel; Service Personnel - Canon OMNERA 400T Operator's Manual

Manual-positioning digital radiographic system
Hide thumbs Also See for OMNERA 400T:
Table of Contents

Advertisement

2.3 Qualifications of personnel

WARNING!
The equipment is intended for use in radiographic examinations under the guidance
of trained health care professionals. Operating personnel must be familiar with the
equipment and the instructions given in this manual before using the equipment.
CAUTION!
Federal law restricts this device to be sold by or on the order of a physician.

2.3.1 Operating personnel

Before using the product it is required that the operating personnel is thoroughly familiar with
the product and its operating instructions, in particular:
• Safety
• Function and safety check list
Note!
It is the responsibility of the owner to ensure that the product is operated only by trained radi-
ologist, service technicians or product specialists.

2.3.2 Service personnel

The equipment shall be serviced only by qualified personnel who:
• is completely familiar with the system
• has read and understood Operation Manual and Installation and Service Manual.
• knows how to remove power to the unit in case of an emergency
• is trained in the use of equipment and procedures of this type.
Failure to follow the instructions given in this Manual could result in serious injury to the serv-
ice person, patient and operator.
Note!
It is the responsibility of the owner to ensure that the technicians have the correct training
and knowledge to perform service and maintenance.
Operator´s Manual
2020-09-18
0180-095-418-EN Rev. 6.1
Page 15
Safety
Qualifications of personnel
OMNERA®

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents