Working Area, Table 0055 - Canon OMNERA 400T Operator's Manual

2.10.4 Working area, Table 0055

WARNING!
Due to squeezing hazard, when operating any motorized movement — when not
placed on the table — patients shall always be outside the working area.
The working area is the size of the table top, including the length of stroke of the table top in
the X- and Y-direction.
The measurements in Fig. 2-16 show the length of the stroke in the X- and Y-direction.
6 0
The Fig. 2-17 shows the dimensions underneath the table
Operator´s Manual
2020-09-18
0 m m
4 1 9 1
0180-095-418-EN Rev. 6.1
Y
X
2 4 0 0
Fig. 2-16
Fig. 2-17
Page 31
Safety
Mechanical Safety
6 0 0 m m
OMNERA®