Mechanical Safety; General; Otc, Mechanical Safety - Canon OMNERA 400T Operator's Manual

Safety

Mechanical Safety

2.10 Mechanical Safety
WARNING!
Tracking is only allowed under supervision of personnel.
WARNING!
Squeezing hazard can occur between column segments and beta rotational assembly
interface.
WARNING!
Squeezing hazard can occur between the column and the plastic corner around the al-
pha movement.
WARNING!
Squeezing hazard can occur between support arm and high tension cable inlet to the
tube.
WARNING!
All obstacles placed within the working area, must be moveable for easy patient re-
lease. This is necessary due to the squeezing hazard.
Note!
Surrounding equipment are not subject of the collision warning.

2.10.1 General

It is the operator's duty to ensure that any danger to the patient and/or third person is pre-
vented, before movements are released.

2.10.2 OTC, Mechanical Safety

WARNING!
Make sure that the personnel who are trained in the use of the equipment are beside
the patient for support, to avoid any potential risk of injury when handling the OTC,
for example squeezing between the Wallstand/Table.
OMNERA® 0180-095-418-EN Rev. 6.1
Page 22
Operator´s Manual
2020-09-18