Patient Size - Canon OMNERA 400T Operator's Manual

3.8 Patient size

The Patient size setting is used for a quick setting of the generator parameters to suit the
physique of the patient.
Patient Size is adjusted by pressing the Patient size selection button. A pop-up window ac-
cording to Fig. 3-13 Patient size selection will open and show available patient sizes.
Patient size selection 1) Paediatric, 2) Small, 3) Medium, 4) Large
Select the desired patient.
The pop-up window will automatically close shortly after the selection. Generator parameters
and collimator settings (field size and filter) will change to the defined values for the new pa-
tient size. If no values are defined the current values will be kept.
Operator´s Manual
2020-09-18
1 2
3
Fig. 3-13 Patient size selection
0180-095-418-EN Rev. 6.1
Page 53
User Interfaces
Patient size
4
OMNERA®