Parameter Tables - Avaya Wireless AP-3 User Manual

Parameter Tables

Objects contain groups that contain both parameters and parameter
tables. Use the following Tables to configure the Access Point. Columns
used on the tables include:
• Name - Parameter, Group, or Table Name
• Type - Data type
• Values - Value range, and default value, if any
• Access = access type, R = Read Only (show), RW = Read-Write
(can be "set"), W = Write Only
• CLI Parameter - Parameter name as used in the Access Point
Access Point network objects are associated with Groups. The network
objects are listed below and associated parameters are described in the
following Parameter Tables:
• System Parameters
• Inventory Management Information
software version information
• Network Parameters
— IP Configuration Parameters
settings
— DNS Client for RADIUS Name Resolution
Access Point as a DNS client
Avaya Wireless AP-3 User's Guide
- Access Point system information
- Hardware, firmware, and
- IP and Network Settings
- Configure the Access Point's IP
Parameter Tables
- Configure the
A-63