Using Telnet To Log In To The Ap - Avaya AP-3 User Manual

Accessing the AP CLI
2. Under File -> Properties -> Settings -> ASCII Setup, enable the
Send line ends with line feeds option.
Result: HyperTerminal sends a line return at the end of each line
of code.
3. Enter the CLI password (default is public).
NOTE:
Avaya recommends changing all default passwords immediately.
See the following sections for information on how to change the
default passwords:
— CLI password, see passwd.
— SNMP passwords (read, read-write, and SNMPv3
authentication and privacy), see
— HTTP password, see

Using Telnet to Log in to the AP

The CLI commands can be used to access, configure, and manage the
AP using Telnet. Follow these steps:
1. Confirm that your computer's IP address is in the same IP subnet
as the AP.
A-22
SNMP
HTTP and HTTPS
Avaya Wireless AP-3 User's Guide
Commands.
Commands.