Provide Access To A Wireless Host In The Same Workgroup; Disable Vlan Management - Avaya Wireless AP-3 User Manual

VLAN/SSID

Provide Access to a Wireless Host in the Same Workgroup

The VLAN feature can allow wireless clients to manage the AP. If the
VLAN Management ID matches a VLAN User ID, then those wireless
clients who are members of that VLAN will have AP management access.
!
CAUTION:
Once a VLAN Management ID is configured and is equivalent to one of
the VLAN User IDs on the AP, all members of that User VLAN will have
management access to the AP. Be careful to restrict VLAN membership to
those with legitimate access to the AP.
1. Click Configure > VLAN.
2. Set the VLAN Management ID to use the same VLAN ID as one
of the configured SSID/VLAN pairs. See
Configurations
3. Place a check mark in the Enable VLAN Protocol box.

Disable VLAN Management

1. Click Configure > VLAN.
2. Remove the check mark from the Enable VLAN Protocol box (to
disable all VLAN functionality) or set the VLAN Management ID to
0 (to disable VLAN Management only).
4-136
for details.
Typical User VLAN
Avaya Wireless AP-3 User's Guide