Setting Up Your Application - Avaya Partner 18 Connection Manual

Using Autodialing Applications with PassageWay Solution

Setting Up Your Application

Set the following parameters for your application:
Baud Rate
PassageWay requires that the application use 1200 baud.
COM Port
Make sure you select the same COM port that is connected to
PassageWay.
Data bits
The data bits (word length) should be set to 7 or 8.
Tone or Pulse dialing
Either setting will work with PassageWay Solution.
Prefix/Suffix
Whatever number you select for the application to use for a dialing
prefix and/or suffix will be used by PassageWay Solution.
NOTE:
Stop bits and parity are not important to PassageWay Solution.
8-3