Setting User Options - Avaya Partner 18 Connection Manual

Installing and Setting Up PassageWay Solution

Setting User Options

The AT&TBuzz user options enable you to further tailor AT&TBuzz to your
needs. You can set the following user options:
Show AT&TBuzz on Ringing
You can set the AT&TBuzz window to appear automatically when a call
rings at your telephone. However, if you do not want to be distracted by
this window "popping up" every time your phone rings, you can set the
AT&TBuzz window to be opened manually (that is, you must double-
click on the AT&TBuzz icon when you want to access the AT&TBuzz
window and answer a call). By defaut the AT&TBuzz window appears
automatically when a call rings at your telephone.
Show AT&TCall Card
If you are running AT&TBuzz in Match to AT&TCall File mode, you can
set whether you want AT&TBuzz to show automatically the card that is
associated with an incoming call. By default, you must select the Show
Card button in the AT&TBuzz window to view the associated card. If you
want AT&TBuzz to automatically show the associated card, you may
specify whether you want the card displayed when the call rings at your
telephone, or when you answer the call.
Automatic Inspect Mode
You can specify whether you want AT&TBuzz to automatically inspect
every incoming call that rings at your telephone. In Automatic Inspect
mode, AT&TBuzz provides the Caller ID automatically for every
incoming call (if available). By default, Automatic Inspect Mode is
disabled.
NOTE:
If you enable Automatic Inspect Mode, you should always answer
calls from AT&TBuzz, instead of answering calls directly from the
2-36