Setting At&Tbuzz To Show The Associated At&Tcall Card Automatically - Avaya Partner 18 Connection Manual

Using AT&TBuzz
3. Select the OK button.
If you want to be prompted for Hold or Drop on each attempt select the
Choose to Hold or Drop option in the Answering Second Call group.
Setting AT&TBuzz to Show the
Associated AT&TCall Card Automatically
When running in Match to AT&TCall File mode, AT&TBuzz enables you to
specify whether you want AT&TBuzz to display automatically the AT&TCall
card associated with the Caller ID of the incoming call. If you want AT&TBuzz
to display the card automatically, you must then specify whether you want the
card to appear when the call rings at your telephone or when you answer the
call. If you do not want AT&TBuzz to automatically display the card, set the On
Button Selection option in the Options dialog box. You can then show the card
manually using the Show Card button in the Tool bar or the Show Card option
in the Controls menu.
To set when the AT&TCall card is displayed:
1.
Select Options . . . from the Setup menu.
The Options dialog box appears.
2. Select the appropriate option in the Show AT&TCall Card section of the
dialog box.
3. When you are finished, select the OK button.
3-16