Resetting The Base Station To Factory Default; Resetting The Base Station Using System Status Application - Avaya D100 Installing And Administering

Sip wireless phones ip office

Hide thumbs Also See for D100:

Table of Contents

Resetting the base station to factory default

You can use multiple methods to reset the base station parameters to factory default. The

methods that follow are listed by order of preference. Read the methods and select the first that

applies to you.

• Preferred method: Use System Status Application to reset the base station.

• Alternative method: If you cannot see the base station in System Status Application, use

the Base Station Web Management Interface.

• Ulterior method: If the preferred and alternative methods do not apply to your situation, see

Resetting the base station using the base station

Resetting the base station using the Base Station Web Management Interface

Resetting the base station using the base station

Resetting the base station using System Status Application

Using System Status Application is the preferred method for resetting the base station to factory

default. Attempt the procedure below before you attempt any other factory reset method.

Procedure

1. Run System Status Application, navigate to System > SIP DECT Base Station and select

the base station you want to reset.

2. On the status page that appears, highlight the desired base station.

3. Click the Reset Base To Default button on the bottom of the status page.

The base station resets to factory default.

Table of Contents

D160