Aother Settings; Resetting To Factory Settings - Lauda ECO Silver E 4 S Operation Manual

The adjustments described in this appendix are only intended for specially qualified personnel.
A Other settings
A.1

Resetting to factory settings

You activate the soft-key bar by pressing any key.
–
all default
Control
 OK
ESC
Control parameter
internal Pt100
miscellaneous
 OK
ESC
no
yes
 OK
ESC
By pressing or
–
10/2019 i
–
–
The adjacent menu window appears.
–
–
STOP
Selecting
–
–
Select the appropriate menu item in the parameter list.
–
–
STOP
–
Select one of the following options:
–
.
–
STOP
(ESC) you are returned to the menu level without any change.
ECO Silver
Access to the main menu level is obtained by pressing the enter
key .
Selection and confirmation of 
Select the menu item all default.
Select one of the following options:
no returns to the previous display without making any changes.
Selecting yes restores the factory settings if you confirm this
with the enter key.
By selecting Control you can select the displayed parameters
with or .
The internal and the external control parameters can be reset
using Control parameter.
The settings for the internal sensor can be reset with
internal Pt100.
With miscellaneous the following can be reset: set value, pump
level, max. current consumption, control to internal and auto-
start to "auto".
Selecting no returns to the previous display without making any
changes.
Selecting yes resets the selected parameter if you confirm this
with the enter key.
Setup Factory Setting.

81 / 124