Lauda ECO Silver E 4 S Operation Manual page 124

EC DECLARATION OF CONFORMITY
Manufacturer: LAUDA DR. R. WOBSER GMBH & CO. KG
Pfarrstrasse 41/43 97922 Lauda-Königshofen Germany
We hereby declare under our sole responsibility that the machines described below
Product Line:
Types:
comply with all relevant provisions of the EC Directives listed below due to their design and type of construction in
the version brought on the market by us:
Machinery Directive
EMC Directive
RoHS Directive
The equipment is not covered by the Pressure Equipment Directive 2014/68/EU, as the maximum classification of
the equipment is Category 1 and it is covered by the Machinery Directive.
The protective objectives of the Machinery Directive with regard to electrical safety are complied with in accordance
with Annex I Paragraph 1.5.1 in conformity with the Low Voltage Directive 2014/35/EU.
Applied harmonized standards:
 EN 12100:2011 (ISO 12100:2010)
EN 61326-1:2013 (IEC 61326-1:2012)

 EN 378-2:2018
 EN 61010-1:2011 (IEC 61010-1:2010 + Cor. :2011)
EN 61010-2-010:2015 (IEC 61010-2-010:2014)

Authorized representative for the composition of the technical documentation:
Dr. Jürgen Dirscherl, Head of Research & Development
Lauda-Königshofen, 13.11.2019
ECO
RE 415 S, RE 415 G, RE 415 SW, RE 415 GW, RE 420 S, RE 420 G,
RE J 1225 G, RE 630 S, RE 630 G, RE 1050 S, RE 1050 G,
RE 1225 S, RE 1225 G, RE 2025 S, RE 2025 G
2006/42/EC
2014/30/EU
2011/65/EU
Serial number:
Dr. Alexander Dinger, Head of Quality Management
Document number: Q5WA-QA13-003-EN
from S190000001
Version 04