General Safety - Lauda ECO Silver E 4 S Operation Manual

1.2

General safety

Read through the operating instructions carefully. They contain important information for working with this device. If
you have any queries, please contact our Service Department ( 8.6).
Follow all the directions in these operating instructions. Only in this way is the correct procedure ensured when work-
ing with the device.
 Make sure that the device is only operated by instructed specialist personnel.
 Never operate the device without heat transfer liquid.
 Never operate the device,
 it is damaged,
 if it is leaking,
 the mains cable is damaged.
 Switch off the device and withdraw the mains plug
 when carrying out service or repair work,
 when moving the device,
 when installing or removing modules or accessories
 in case of danger.
 Do not make technical modifications to the device. Infringements in this respect invalidate the warranty.
 Have service and repair work carried out only by specialists.
 Follow the safety information in the following sections and read it through carefully.
The devices are not designed for use in medical applications in accordance with DIN EN 60601-1 and IEC 601-1!
Classification in accordance with EMC requirements
Device
Heating thermostat
ECO Silver
Heating thermostat
ECO Silver
Device
Cooling thermostat
ECO Silver
Cooling thermostat
ECO Silver
10/2019 i
Immunity
Type 1 in accordance with
DIN EN 61326-1
Type 1 in accordance with
DIN EN 61326-1
Immunity
Type 1 in accordance with
DIN EN 61326-1
Type 1 in accordance with
DIN EN 61326-1
ECO Silver
Emissions Class
Emissions Class B
in accordance with CISPR 11
Emissions Class B
in accordance with CISPR 11
Emissions Class
Emissions Class B
in accordance with CISPR 11
Emissions Class B
in accordance with CISPR 11
Customer power supply
Only for EU
Domestic connection value
≥ 100 A
Worldwide
No limitation
Customer power supply
Only for EU
Domestic connection value
≥ 100 A
Worldwide
No limitation
9 / 124