Windows Level Check; Check The Dicom Connection - GE LOGIQworks Basic Service Manual

GE M S
EDICAL YSTEMS
D 5184024-100, R
IRECTION
4-3-1

Windows Level Check

4-3-1-1

Check the DICOM Connection

Receiving DICOM images requires preparation of both the receiving and the sending site.
Condition: The LOGIQworks system needs to be connected to the network. See
2-14.
Testing the DICOM association:
We recommend testing the association to all devices listed in the destinations and origins table (please
refer to Section 3-5-10-1 "Setting up and configuring origins" on page 3-183
"Setting up and configuring destinations" on page
LOGIQworks have been correctly configured. There is a utility to test the DICOM association: DCMPing,
which can be found in: C:\AMI_61\Bin for LOGIQworks up to 1.3 systems and in directory C:\Program
Files\Centricity\RA600\7.0\Bin for LOGIQworks 2.0 and LOGIQworks 3.0.
5
EVISION
Chapter 4 Functional Checks
LOGIQ
WORKS
3-186) to ensure that the remote system and
B S M
ASIC ERVICE ANUAL
Section 2-3-4 on page
and Section 3-5-10-2
4-3