Writing A Dicom Volume To Dvd Or Cd-R/Rw - GE LOGIQworks Basic Service Manual

GE M S
EDICAL YSTEMS
D 5184024-100, R
IRECTION
3-5-11-2 Writing a DICOM volume to DVD or CD-R/RW (SME) (cont'd)
7.) In the "Image directory" field, type in the path and directory on your hard disk where you want
LOGIQworks to temporarily store images before burning them to CD or DVD. You can also use the
Browse... button to navigate to this location.
8.) Check the "Verify burned contents" check box, if you want a message stating that your data has
been copied to the CD.
9.) Check the "Delete marked studies after archiving" check box, if you want the study deleted after it
has been copied, and then click OK. Note that this option will only be performed after data from the
local database is archived, not with archiving data you selected.
10.)Check the "Enable Archive Index Tool" check box if you are planning to use the Archive Index Tool
to index the data placed on the CD or DVD.
11.)Check the "Automatically add volumes to AIT" Tool if you want to immediately add to the Archive
Index the volume to which you want to save data.
12.)Click OK to complete the configuration.
5
EVISION
Chapter 3 Installation
LOGIQ ® B S
WORKS ASIC ERVICE
M
ANUAL
3-201