GE LOGIQworks Basic Service Manual page 291

GE M S
EDICAL YSTEMS
D 5184024-100, R
IRECTION
4-3-3-10 Remote View (cont'd)
4.) In the center of your screen you have your local view at the top [4a] and beneath is a second window
showing one of your remote views [4b]. If you have multiple remote views, you see tabs at the
bottom of this window.
5.) A green indicator light at the left upper edge shows that the connection has been properly
established.
4a
5
4b
4-3-3-11 Configuring the scanner
1.) On the scanner choose "Utility" > "Connectivity"
2.) Choose the "TCP/IP" tab. Do not change the Computer Name.
3.) Choose the "Device" tab.
4.) Choose the "Service" tab.
5
EVISION
Figure 4-17 Remote View
1.) Enter the "IP-Address" and the "Subnet Mask" values.
1.) Enter the "Name" and the "IP Address".
1.) Choose in the "Destination Device" field the "LOGIQworks" entry from the pull-down
menu.
2.) Choose the "Dicom Image Storage" from the text field below.
Chapter 4 Functional Checks
LOGIQ B S
WORKS ASIC ERVICE
M
ANUAL
4-17