GE LOGIQworks Basic Service Manual page 242

GE M S
EDICAL YSTEMS
D 5184024-100, R
IRECTION
3-5-8-4 Maintenance
To specify maintenance tasks relating to the LOGIQworks Print Service:
1.) Select Configuration > Print Service... from the Data Selector menu.
2.) Select the Maintenance tab from the Print Service Properties page.
Figure 3-149 Print Service Properties - Maintenance (Default settings)
Startup Delay: Specify the delay (in seconds) after start-up after which the first maintenance check
•
will be performed.
Maintenance Times: Specifies at which moments in time a maintenance check will be performed.
•
These checks are done every day, and only if the system is up and running at that. (Default: 01:00,
09:00 and 17:00).
-
-
-
Max. No. Log Records: The maximum permitted size of the job log. If the number of job log records
•
exceeds this, the log will be truncated to the stated size by deleting the oldest jobs first.
Thread Priority: Priority of the Maintenance thread within the service. Changing this setting may
•
influence system performance.
3-176
5
EVISION
You can add a time by filling in the field beneath the list of Maintenance Times and clicking
on the Add button.
You can delete a time by selecting the time in the Maintenance Times list and clicking the
Remove button.
You replace one maintenance time with another by filling in the field beneath the list of
Maintenance Times, selecting the time you want to replace and clicking the Replace button.
Section 3-5 - Configuration
LOGIQ B S
WORKS ASIC ERVICE
Administrator only
Administrator only
M
ANUAL