Maintenance - GE LOGIQworks Basic Service Manual

GE M S
EDICAL YSTEMS
D 5184024-100, R
IRECTION
3-5-7-4 Input (cont'd)
Figure 3-143 Database Service Properties - Input (Default settings)
Input Directory: Directory which will be watched (monitored) for new data. Data converted to AMI
•
format (.IMG and MET files) and copied into this directory will be automatically added to the local
database. (Default: %DATADIR%\DATABASE\INPUT)
Input Folder: New data will be added to this folder in the local database.
•
Minimum Stable Time: Time (in seconds) during which the input directory must be stable (there
•
have been no writes to this directory) before the Database Service starts appending the data in the
input directory to the local database.
Thread Priority: Priority of the Input thread within the service. Changing this setting may influence
•
system performance.
3-5-7-5

Maintenance

To set up the maintenance aspects of the Database Service:
1.) Select Configuration > Database Service... from the Data Selector menu.
2.) Select the Maintenance tab from the Database Service Properties page.
3-170
5
EVISION
Section 3-5 - Configuration
LOGIQ B S
WORKS ASIC ERVICE
Administrator only
M
ANUAL