GE LOGIQworks Basic Service Manual page 121

GE M S
EDICAL YSTEMS
D 5184024-100, R
IRECTION
3-4-3-16 Monitor Connections of System based on Dell Precision 370
1.) Connect the Monitor Power Cable to the rear of the Monitor.
2.) Connect the other end to a Wall Power Outlet.
3.) Connect the Y-Monitor Signal Cable to the display Card Socket at the rear of the PC.
4.) Connect the Monitor Signal Cable to the Y-Monitor Cable tagged with 1.
5.) Connect the other end to the digital Monitor Signal Input 1 as shown in the picture.
5
EVISION
Figure 3-42 LCD Monitor Power Connection
Chapter 3 Installation
LOGIQ ® B S
WORKS ASIC ERVICE
Rear of LCD Monitor
M
ANUAL
3-55