7.10. Panel Backlight Wafer for LVDS (FPD)
The wafer FPD provides power supply for flat panel and its backlight inverter.
Figure 26: Panel Backlight Wafer FPD
Table 32: Pin Assignment FPD
Pin
Signal
1
BL_EN**
2
BL_ADJ_PWM
3
+5V / +12V*
4
+5V / +12V*
5
GND
6
GND
* Backlight Power can be selected by Jumper LCD_VCC.
** BL_EN can be selected by Jumper BL_EN.
www.kontron.com
Description
Backlight Enable signal
Backlight Adjustment PWM (Pulse Width Modulation) signal
+5 V / +12 V power supply
+5 V / +12 V power supply
Ground
Ground
MITX-CFL0 Series - User Guide, Rev. 1.1
Note
// 48