Table of Contents
Advertisement
Feature
Serial Port 5 Type
Date Transfer Rate
RS485 Duplex Mode
RS485 Auto Flow
Control
RS485/422 Receiver
Termination
Figure 53: BIOS Advanced Menu - Super IO Configuration - Serial Port 6 Configuration
Main
Advanced
Super Port 6 Configuration
Serial Port
Device Settings*
Change Setting*
Serial Port 6 Type*
Data Transfer Rate*
RS485 Duplex Mode*
RS485 Auto Flow Termination*
RS485/422 Receiver Termination*
* These items appear only when enabling Serial Port.
(1)
This item appears only when selecting RS485 or RS422 for the Serial Port 6 Type.
(2)
This item appears only when selecting RS485 for the Serial Port 6 Type.
This item appears only when selecting RS485 for the Serial Port 6 Type and Half Duplex for RS485 Duplex Mode.
(3)
Feature
Serial Port
Change Settings
www.kontron.com
Option
[RS232],
[RS422],
[RS485]
[250Kbps, One
Transmitter Switching],
[RS-422/RS-485 to
20Mbps]
[Half Duplex],
[Full Duplex]
[Disabled],
[Enabled]
[Disabled],
[Enabled]
BIOS SETUP UTILITY
Power
[Enabled]
IO=2E0h; IRQ=7;
[Auto]
[RS232]
[250Kbps, One Transmitter Switching]
[Half Duplex]
(2)
[Disabled]
(3)
[Enabled]
(1)
Version 2.20.1275. Copyright (C) 2021, American Megatrends, Inc.
Option
[Disabled], [Enabled]
[Auto],
[IO=2E0h; IRQ=7;],
[IO=3E8h; IRQ=3, 4, 5, 6,
7, 9, 10, 11, 12;],
[IO=2E8h; IRQ=3, 4, 5, 6,
7, 9, 10, 11, 12;],
[IO=2F0h; IRQ=3, 4, 5, 6,
Description
Select an appropriate type for Serial Port 5.
Select an appropriate setup item for Data Transfer Rate.
Select an appropriate RS485 Duplex Mode.
Select whether to enable or disable RS485 Auto Flow Control.
Select whether to enable or disable RS485/422 Receiver
Termination.
Boot
Description
Select whether to enable or disable Serial Port (COM).
Select an optional setting for Super IO device.
MITX-CFL0 Series - User Guide, Rev. 1.1
Security
Save & Exit
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
// 82
Advertisement
Table of Contents
